Microh ARENA COLOUR WASH Bedienungsanleitung

MICROH ARENA ULTRA WASH ii USER MANUAL © Copyright 2001

9(see the drawing). Turn one screw at a time to drag the hotspot diagonally across the projected image. If you cannot detect a hotspot, adjust the la

10 The ARENA ULTRA WASH can be placed directly on the stage floor or rigged in any orientation on a truss without altering its operation charac

113.4. DMX-512 connection / connection between fixtures The wires must not come into contact with each other, otherwise the fixtures will not work

124. DMX-Protocol 4.1. Function of the control channels – 16-bit protocol Channel 1 - Horizontal movement (Pan) Push the fader up in order to move

13Channel 7 – Colour wheel Linear colour change follows the movement of the fader, allowing you to stop the colour wheel at any position - even betwe

14 Channel 13 – Effect wheel 0 - 70 Full beam 71 - 230 Beam-shaper 231 - 255 Frost-filter Channel 14 - Zoom 0 Zoom 7° 255 Zoom

155. Addressing The Control Panel on the top side of the ARENA ULTRA WASH allows you to assign the DMX fixture address. This is defined as the first

166. Remotely Controllable Functions 6.1. Lamp The ARENA ULTRA WASH is to be installed with a PHILIPS MSR 575/2 or MSD 575 lamp. A relay inside of

177. Control Panel The Control Panel situated on the top side of the ARENA ULTRA WASH offers several features. You can easily set the DMX address, re

18 - Reset Function Press the [Enter] key to run a reset. This option enables the ARENA ULTRA WASH to index all effects (functions) and return the

1 Congratulations on your purchase of a MICROH ARENA ULTRA WASH II Or as we affectionately call it the “Ultra Wash“ Every effort has been made to

19 Important: The option"Off" is for "emergency operation" only in the event that the lamp light sensor is defective and you are

20 - Temperature Displays the internal temperature of the fixture in Celsius. Internal temperatures below 80° C are not critical. However, tempera

21 - Adjusting the default positions By using this function you can calibrate and adjust the different wheels to their standard/correct positions. U

22 DMX Calibration protocol: After having calibrated the necessary functions press [Enter] to confirm (or [Mode] to cancel and return to the men

238. Error and Information Messages This message appears if you try to switch the lamp on within 5 minutes after having switched it off as the lamp

249. Technical Specifications Power supply EU-model: 208/230/240 V AC, 50/60 Hz ~ US/Canadian-model: 100/115/208/230 V AC, 50/60 Hz ~ Power consump

25 Pan/Tilt Pan movement range 530° Tilt movement range 280° 8/16-bit movement resolution Automatic Pan / Tilt position correction Maximum PAN-movem

2610. Cleaning and Maintenance The operator has to make sure that safety related and machine technical installations are inspected by a skilled per

2711. Appendix We hope that you will enjoy your ARENA ULTRA WASH. We can assure you that this fixture will give you many years of reliable service if

2 ARENA ULTRA WASH ii User Manual Table of contents 1. Safety ...

3 CAUTION! Keep this fixture away from rain and moisture! Unplug from power supply before opening the housing! FOR YOUR OWN SAFETY, PLEASE READ THI

4 When replacing lamps and fuses, use the same type and rating only. Caution: Do not touch the fixture barehanded during its operation, the housin

52. Introduction Thank you for having chosen an ARENA ULTRA WASH. You have acquired a versatile, powerful and intelligent lighting effect. Unpack y

6Description of the fixture Left side panel: 8 – Power switch 9 – Power cord 10 - Fuseholder Right side panel: 11 – DMX output 12 – DMX input Co

7 2.3. Photometrics

83. Installation 3.1. Fitting/Exchanging the lamp DANGER! Install the lamp with the fixture switched off. Unplug from power supply before opening